Table 56: Show Qos-Parameter Output Fields - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

JUNOSe 11.1.x Quality of Service Configuration Guide
host1#show qos-parameter references gigabitEthernet 6/0 explicit
Table 56 on page 354 lists the show qos-parameter command output fields.
Meaning

Table 56: show qos-parameter Output Fields

Related Topics
354
Monitoring QoS Parameter Instances
Field Name
interface
parameter name
value
source
service manager refs
persistence
Global parameter instances
Parameter instances reported
Explicit parameter instances
Hierarchical parameter instances
IP multicast parameter instances
Creating Parameter Instances
show qos-parameter
Field Description
Location of the interface to which the parameter
instance is assigned; global indicates that the
parameter is assigned to the chassis
Name of the parameter instance
Value assigned to the parameter instance
Source of the parameter instance:
dcm Parameter instance was created in a
profile
radius Parameter instance was created through
RADIUS
service manager Parameter instance was
created through Service Manager
default Parameter instance was created
through the CLI or SNMP
Number of references of this parameter instance
created through Service Manager
Status of the persistence of a parameter instance in
the system:
persistent Parameter instance is stored in NVS
and is restored after a chassis reset
non-persistent Parameter instance is not stored
in NVS and are deleted after a chassis reset
Number of parameter instances assigned to the
chassis
Total number of parameter instances assigned
Total number of explicit parameter instances assigned
Total number of hierarchical parameter instances
assigned
Total number of parameter instances associated with
the IP multicast bandwidth adjustment application