Important Information About Robots With Protection Type Foundry Prime - ABB Robotics IRB 6790 Product Manual

Important information about robots with protection type Foundry Prime

Important information about robots with protection type
Foundry Prime
Introduction
Foundry Prime robots are specially designed to work in harsh environments. Misuse
of the robots or poor installation, cleaning, maintenance and repair can be harmful
for the functioning of the robot.
Warranty claims
Warranty claims for defect products due to misuse or failure to fulfil operational
and maintenance requirements will not be approved.
Pressurized components
Motors, balancing device and the serial measurement board cavity shall be
pressurized on Foundry Prime robots during operation and shut down. The
overpressure can be dropped when atmospheric humidity has reached the same
level as the surrounding environment.
For more information, see
Cleaning
Special procedures are needed when cleaning the Foundry Prime robot. See section
Cleaning the IRB 6790 on page
Product manual - IRB 6790
3HAC063331-001 Revision: B
Pressurized system on page
161.
© Copyright 2019 - 2020 ABB. All rights reserved.
73.
15