ABB Robotics IRB 6790 Product Manual page 186

4 Repair
4.3.3 Attaching lifting accessories to the upper arm
Continued
3
4
5
6
186
Action
Fit a lifting eye in the arm house, with a
fender washer underneath.
xx1400002196
Note
Save the stop screw installed, to refit after
the lifting eye is removed.
Attach the upper arm lifting accessory
(chain) to an overhead crane (or similar)
and then to the lifting eye in the arm house
and in the wrist.
Raise the lifting accessories to take the
weight of the upper arm.
In case of necessary adjustments, use the
shortening loops on the lifting accessory
(chain) to find the level position.
© Copyright 2019 - 2020 ABB. All rights reserved.
Note
Lifting eye: 3HAC16131-1
Fender washer: Outer diameter: minimum
26 mm, maximum 30 mm, hole diameter:
13 mm, thickness: 3 mm.
xx1200001134
Lifting accessory (chain): 3HAC15556-1
xx1200001308
xx1400002197
Product manual - IRB 6790
3HAC063331-001 Revision: B