3 Maintenance
3.3.12 Inspecting the dampers
3.3.12 Inspecting the dampers
Location of dampers
The figure below shows the location of all the dampers to be inspected.
A
B
Required equipment
Visual inspection, no tools are required.
Inspecting, dampers
The procedure below details how to inspect the dampers.
1
Continues on next page
126
Axis-2 damper, 2 pcs
Axis-3 damper, 2 pcs
Note
A damaged damper must be replaced.
Action
DANGER
Turn off all:
•
electric power supply to the robot
•
hydraulic pressure supply to the robot
Before entering the robot working area.
© Copyright 2019 - 2020 ABB. All rights reserved.
Note
Product manual - IRB 6790
3HAC063331-001 Revision: B