Inspecting The Fork Lift Accessory - ABB Robotics IRB 6790 Product Manual

3 Maintenance

3.3.11 Inspecting the fork lift accessory

3.3.11 Inspecting the fork lift accessory
Introduction
The installation and use of the Fork lift accessories is described in:
The fork lift accessories are supposed to be removed after use.
Location of fork lift accessory
The fork lift accessory is fitted to the robot as shown in the figure.
A
B
Required equipment
Equipment
Fork lift accessory set
Standard toolkit
Continues on next page
124
• Directions for use - Fork lift accessory for IRB 6700
A
B
Fork lift pocket (4 pcs)
Hex socket head cap screw M20x60 quality steel 8.8-A3F (2 pcs per fork lift
device)
© Copyright 2019 - 2020 ABB. All rights reserved.
Article number Note
- Content is defined in section
toolkit on page
Standard
652.
Product manual - IRB 6790
3HAC063331-001 Revision: B