ABB Robotics IRB 6790 Product Manual page 600

4 Repair
4.8.3 Replacing the axis-3 gearbox
Continued
3
4
5
6
7
Continues on next page
600
Action
Connect the motor cables.
Connect in accordance with the markings
on the connectors.
Inspect the o-ring.
Note
Replace if damaged.
Wipe clean o-ring and o-ring groove.
Refit the o-ring.
Tip
Lubricate the o-ring with some grease for
a better fitting in the groove.
CAUTION
When fitting the motor cover, make sure
that none of the cables inside will be dam-
aged.
© Copyright 2019 - 2020 ABB. All rights reserved.
Note
xx1200001066
O-ring, axis-1: 3HAC067762-001
O-ring, axis-2: 3HAC067762-001
O-ring, axis-3: 3HAC067762-001
O-ring, axis-4: 3HAC067744-001
xx1200001070
Product manual - IRB 6790
3HAC063331-001 Revision: B