Honda Accord 2008 Manual page 2119

07/11/02 09:29:20 61TA0000_220_0089
Under-dash Fuse/Relay Box
Driver's Under-dash Fuse/Relay Box (MICU) Removal/Installation (cont'd)
Installation
1. Install the relays and connect the connectors to the
driver's under-dash fuse/relay box, then install the
driver's under-dash fuse/relay box in the reverse
order of removal.
2. Install the removed parts in the reverse order of
removal.
3. Do the battery terminal reconnection procedure
steps 1 to 4 (see page 22-89).
4. Register the immobilizer system with the HDS
(see page 22-410).
NOTE: The imoes unit is built into the driver's MICU
which is part of the driver's under-dash fuse/relay
box. Because of this construction, the imoes must
be registered, or the vehicle will not start.
5. Do the remaining steps of battery terminal
reconnection procedure (see page 22-89).
6. Confirm that all systems work properly.
22-86