Honda Accord 2008 Manual page 2118

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:29:20 61TA0000_220_0088

Canada models

NOTE: SRS components are located in this area.

Review the SRS component locations 4-door (see page

24-19), 2-door (see page 24-21), and precautions and

procedures (see page 24-23) before doing repairs or

1. Do the battery terminal disconnection procedure

(see page 22-89).

2. Remove the driver's dashboard lower cover

(see page 20-152), and the left kick panel:

• 4-door (see page 20-99)

• 2-door (see page 20-97)

3. Loosen the bolts (A), then remove the bolt (B) from

the bracket (C).

4. Remove the bracket from the driver's under-dash

fuse/relay box (D).

5. Disconnect the connectors from the fuse side of the

driver's under-dash fuse/relay box (A).

6. Remove the screws and cover (B) from the driver's

under-dash fuse/relay box.

7. Remove the mounting bolt, and pull the driver's

under-dash fuse/relay box away from the body.

8. Disconnect the connectors from the back side of the

driver's under-dash fuse/relay box, then remove

the driver's under-dash fuse/relay box.

9. Carefully remove the relays by prying under the

base of the relay.

NOTE: Do not use pliers. Pliers will damage the

relays, which could cause the engine to stall or not

Chapters

Table of Contents