Ntp- D278 Set Up Computer For Ctc - Cisco ONS 15454 SDH Procedure Manual

NTP- D278 Set Up Computer for CTC

NTP-D278 Set Up Computer for CTC
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note JRE 1.4.2 or JRE 5.0 is required to log into nodes running Release 7.0. To log into nodes running Release
4.5 or earlier, you must uninstall JRE 1.4.2 or 5.0 and install JRE 1.3.1_2. Complete the
Change the JRE Version" task on page 21-4
Step 1 If your computer does not have an appropriate browser installed, complete the following:
•
•
Complete the
Step 2
CTC efficiency.
If your computer is a Windows PC, complete the
Step 3
Windows" task on page
If your computer is a UNIX workstation, complete the
Step 4
UNIX" task on page
When your PC or workstation is set up, continue with the setup procedure appropriate to your network:
Step 5
•
•
•
Cisco recommends that you configure your browser to disable the caching of user IDs and passwords on
Note
computers that are used to access Cisco optical equipment.
In Internet Explorer, choose Tools > Internet Options > Content. Click Auto Complete and uncheck
the User names and passwords on forms option.
In Netscape 7.0, choose Edit > Preferences > Privacy & Security > Forms and uncheck the option to
save form data. For passwords, choose Edit > Preferences > Privacy & Security > Passwords and
uncheck the option to remember passwords. Note that passwords can be stored in an encrypted format.
Netscape versions earlier than 6.0 do not cache user IDs and passwords.
Stop. You have completed this procedure.
Cisco ONS 15454 SDH Procedure Guide, R7.0
3-2
This procedure configures your PC or UNIX workstation to run CTC.
Cisco ONS 15454 SDH Release 7.0 software CD
Chapter 1, "Install the Shelf and FMECs"
Required
Onsite or remote
None
To install Netscape 7.x, download the browser at the following site:
http://channels.netscape.com/ns/browsers/default.jsp
To install Internet Explorer 6.x on a PC, download the browser at the following site:
http://www.microsoft.com
"DLP-D224 Adjust the Java Virtual Memory Heap Size" task on page 19-23
21-18, then go to
21-21.
NTP-D260 Set Up CTC Computer for Local Craft Connection to the ONS 15454 SDH, page 3-3
NTP-D261 Set Up a Computer for a Corporate LAN Connection to the ONS 15454 SDH, page 3-5
NTP-D262 Set Up a Remote Access Connection to the ONS 15454 SDH, page 3-6
Chapter 3
as necessary.
"DLP-D433 Run the CTC Installation Wizard for
Step 5.
"DLP-D434 Run the CTC Installation Wizard for
Connect the PC and Log into the GUI
"DLP-D422
to improve
78-17194-01