DLP- D348 View ML-Series Ether Ports PM Parameters
Return to your originating procedure (NTP).
Step 5
DLP-D348 View ML-Series Ether Ports PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
For ML-Series card provisioning, refer to the Ethernet Card Software Feature and Configuration Guide
Note
for the Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327.
In node view, double-click the ML-Series Ethernet card where you want to view PM counts. The card
Step 1
view appears.
Click the Performance > Ether Ports tabs
Step 2
Figure 20-11
Card View
Performance
Ether Ports
Step 3
Click Refresh. PM statistics for each port on the card appear.
Cisco ONS 15454 SDH Procedure Guide, R7.0
20-56
This task enables you to view ML-Series Ethernet port PM counts at
selected time intervals to detect possible performance problems.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Retrieve or higher
Ether Ports on the Card View Performance Window
tab
tab
Refresh
button
(Figure
20-11).
Auto-refresh
Chapter 20
DLPs D300 to D399
Baseline
button
78-17194-01