Ntp- D310 Merge Circuits - Cisco ONS 15454 SDH Procedure Manual

Chapter 7 Manage Circuits
NTP-D310 Merge Circuits
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Step 2 Click the Circuits tab.
Click the circuit that you want to use as the master circuit for a merge.
Step 3
Click Edit.
Step 4
In the Edit Circuits window, click the Merge tab.
Step 5
Choose the circuits that you want to merge with the master circuit.
Step 6
Click Merge.
Step 7
In the confirmation dialog box, click Yes to continue.
Step 8
In the notification box, view the merge result. Click Ok.
Step 9
Stop. You have completed this procedure.
NTP-D352 Manage VLANs
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
From the Tools menu, choose Manage VLANs. The All VLANS dialog box appears listing all of the
Step 2
VLAN topologies in the network.
Complete the following as necessary:
Step 3
•
78-17194-01
This procedure merges two circuits that create a single, contiguous path but
are separate circuits because of different circuit IDs or conflicting
parameters. A merge combines a single master circuit with one or more
circuits.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-D60 Log into CTC" task on page
This procedure allows you to view, create, or delete VLANs.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-D60 Log into CTC" task on page
To add a VLAN, complete the
17-49. If you are already logged in, continue with
17-49. If you are already logged in, continue with
"DLP-D243 Create a VLAN" task on page
Cisco ONS 15454 SDH Procedure Guide, R7.0

NTP- D310 Merge Circuits

19-46.
7-11