Dlp- D203 Clear A Lock-On Or Lockout - Cisco ONS 15454 SDH Procedure Manual

Chapter 19 DLPs D200 to D299
DLP-D203 Clear a Lock-On or Lockout
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Maintenance > Protection tabs.
Step 1
In the Protection Groups list, click the protection group that contains the card you want to clear.
Step 2
In the Selected Group list, click the card you want to clear.
Step 3
In the Inhibit Switching area, click Unlock.
Step 4
Click Yes in the confirmation dialog box.
Step 5
The lock-on or lockout state is cleared.
Step 6 Return to your originating procedure (NTP).
DLP-D204 Clean Multi Fiber-Optic Cable Connectors
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do
Warning
not stare into the beam or view directly with optical instruments. Statement 1051
Remove the protective cap on the optical fiber cable connector.
Step 1
Read the manufacturer (cleaning cartridge) instructions to insert the connector into the cleaning
Step 2
cartridge.
Slide the lever on the cartridge to swipe the connector surface.
Step 3
Insert the fiber connector into the applicable adapter or attach a dust cap to the fiber connector.
Step 4
78-17194-01
This task removes a Lock On or Lockout state.
None
DLP-D201 Apply a Lock-On, page 19-1
DLP-D202 Apply a Lockout, page 19-2
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Maintenance or higher
This task cleans the multi fiber optic connectors
Cleaning Cartridge for multi fiber optic connectors
None
As needed
Onsite
None
Cisco ONS 15454 SDH Procedure Guide, R7.0

DLP- D203 Clear a Lock-On or Lockout

or
19-3