Cisco ONS 15454 SDH Procedure Manual page 253

Chapter 6 Create Circuits and Low-Order Tunnels
Tip
In the Available VLANs column, click the VLAN you want to use and click the arrow button (>>) to
Step 18
move the VLAN to the Circuit VLANs column.
Note
Click Next.
Step 19
In the Circuit Routing Preferences area, uncheck the Route Automatically check box and click Next.
Step 20
In the Route Review and Edit area, click the source node, then click a span (green arrow) leading away
Step 21
from the source node.
The span turns white.
Click Add Span.
Step 22
The span turns blue. CTC adds the span to the Included Spans list.
Click the node at the end of the blue span.
Step 23
Click the green span attached to the node you clicked in
Step 24
The span turns white.
Step 25 Click Add Span.
The span turns blue.
Repeat Steps
Step 26
Verify that the new circuit is correctly configured in the Route Review and Edit area. If the circuit
Step 27
information is not correct, click the Back button and repeat the procedure with the correct information.
Note
Step 28 Click Finish.
Step 29 Complete the
carries the circuit.
Step 30 Complete the
page 19-19
Complete the
Step 31
Stop. You have completed this procedure.
78-17194-01
You can also add VLANs in network view by choosing Tools > Manage VLANs. In the
All VLANs dialog box, click the Create button to open the Define New VLAN dialog box.
Moving the VLAN from Available VLANs to Circuit VLANs forces all the VLAN traffic to use
the shared packet ring you are creating.
23 through 25 for every node in the ring.
If the circuit is incorrect, you can also click Finish, delete the completed circuit, and begin the
procedure again.
"DLP-D220 Provision E-Series Ethernet Ports" task on page 19-18
"DLP-D221 Provision E-Series Ethernet Ports for VLAN Membership" task on
for each node that carries the circuit.
"NTP-D146 Test E-Series Circuits" procedure on page
NTP- D142 Create an E-Series Shared Packet Ring Ethernet Circuit
Step 23.
6-89.
Cisco ONS 15454 SDH Procedure Guide, R7.0
for each node that
6-79