Table 20-16 Electrical Path Threshold Options For E3-12 Cards; Table 20-17 Sdh Threshold Options For E3-12 Cards - Cisco ONS 15454 SDH Procedure Manual

DLP- D340 Change Line and Threshold Settings for the E3-12 Cards
Table 20-16
Table 20-16
Parameter
Port
ES
SES
UAS
15 Min radio button
1 Day radio button
Table 20-17
Table 20-17
Parameter
Port
ES
SES
EB
UAS
BBE
15 Min radio button
1 Day radio button
Note
Step 7 Return to your originating procedure (NTP).
Cisco ONS 15454 SDH Procedure Guide, R7.0
20-46
describes the values on the Provisioning > Elect Path Thresholds tab for the E3-12 cards.
Electrical Path Threshold Options for E3-12 Cards
Description
(Display only) E-3 ports; 1 to 12.
Errored seconds.
Severely errored seconds.
Unavailable seconds.
Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 15-minute intervals.
Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 1-day intervals.
describes the values on the Provisioning > SDH Thresholds tab for the E3-12 cards.
SDH Threshold Options for E3-12 Cards
Description
(Display only) E-3 ports; 1 to 12.
Errored seconds.
Severely errored seconds.
Errored blocks.
Unavailable seconds.
Background block errors.
Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 15-minute intervals.
Clicking this radio button and then clicking Refresh will cause the threshold
values on this tab to display for 1-day intervals.
The threshold value appears after the circuit is created.
Chapter 20 DLPs D300 to D399
78-17194-01