Cisco ONS 15454 SDH Procedure Manual page 42

Procedures
DLP-D437 Change Node Access and PM Clearing Privilege
DLP-D438 Change Port Settings for the FC_MR-4 Card
DLP-D441 Create Ethernet RMON Alarm Thresholds
DLP-D442 Preprovision a Slot
DLP-D457 Refresh E-Series and G-Series Ethernet PM Counts
DLP-D458 Monitor PM Counts for a Selected Signal
DLP-D459 Clear Selected PM Counts
DLP-D460 View FC_MR-4 Statistics PM Parameters
DLP-D461 View FC_MR-4 Utilization PM Parameters
DLP-D462 View FC_MR-4 History PM Parameters
DLP-D463 Refresh FC_MR-4 PM Counts at a Different Time Interval
DLP-D465 Create FC_MR-4 RMON Alarm Thresholds
DLP-D466 Delete FC_MR-4 RMON Alarm Thresholds
DLP-D468 Create a Two-Fiber MS-SPRing Using the MS-SPRing Wizard
DLP-D469 Create a Two-Fiber MS-SPRing Manually
DLP-D470 Manually Route an SNCP Circuit for a Topology Upgrade
DLP-D471 Automatically Route an SNCP Circuit for a Topology Upgrade
DLP-D493 Provision the Ethernet Port of the ML-Series Card
DLP-D494 Provision the POS Port of the ML-Series Card
Cisco ONS 15454 SDH Procedure Guide, R7.0
xviii
21-26
21-28
21-33
21-34
21-36
21-37
21-38
21-39
21-40
21-44
21-46
21-50
21-25
21-33
21-40
21-44
21-47
21-48
21-49
78-17194-01