Cisco ONS 15454 SDH Procedure Manual page 825

Appendix A CTC Information and Shortcuts
Table A-3 CTC Menu and Toolbar Options (continued)
Menu Menu Option
Tools Circuits
Overhead Circuits
Topology Upgrade
Manage VLANs
Open TL1
Connection
Open IOS
Connection
Update CTC
Help Contents and Index
User Manuals
About CTC
78-17194-01
Toolbar Description
— Displays the following options:
Repair Circuits—(ONS 15454 only) Repairs incomplete circuits following
•
replacement of the ONS 15454 SDH. Refer to the Cisco ONS 15454 SDH
Troubleshooting Guide for more information.
Reconfigure Circuits—Allows you to reconfigure circuits. For more
•
information, refer to the Cisco ONS 15454 SDH Reference Manual.
• Set Path Selector Attributes—Allows you to edit subnetwork connection
protection (SNCP) circuit path selector attributes. See the
SNCP Circuit Path Selectors" task on page
Set Circuit State—Allows you to change a circuit state. See the
•
Change a Circuit State" task on page
Roll Circuit—Allows you to reroute live traffic without interrupting
•
service.
Delete Rolls—Removes rolls that are not deleted by CTC after a roll has
•
been completed.
— Displays the Repair IP Tunnels option, which fixes circuits that are in the
PARTIAL status as a result of node IP address changes. See the
Repair an IP Tunnel" task on page
— Displays the following options:
Convert SNCP to MS-SPRing—Converts SNCP to MS-SPRing. See the
•
"NTP-D210 Convert an SNCP to a Two-Fiber MS-SPRing Manually"
section on page
Convert Unprotected to SNCP—Converts a point-to-point or linear
•
add/drop multiplexer (ADM) to SNCP. See
Point-to-Point or Linear ADM to an SNCP Manually" section on
page 13-11
— Displays a list of VLANs that have been created and allows you to delete
VLANs. See the
Displays the TL1 window, which allows you to enter TL1 commands.
Displays the Cisco IOS command line interface dialog box if a Cisco IOS
capable card (ML1000-2 or ML100T-12) is installed in the node. Refer to the
Ethernet Card Software Feature and Configuration Guide for the
Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327.
—
Allows you to update CTC to a newer version, if a newer version was found
during network discovery.
— Displays the online help window.
— Displays the Cisco ONS 15454 SDH documentation.
— Displays the software version and the nodes in the CTC session.
19-26.
17-25.
13-14.
"DLP-D34 Delete VLANs" task on page
Cisco ONS 15454 SDH Procedure Guide, R7.0
Manage the CTC Window
"DLP-D233 Edit
19-29.
"DLP-D230
"DLP-D30
"NTP-D156 Convert a
17-27.
A-7