Cisco ONS 15454 SDH Procedure Manual page 7

Monitor Performance
8
C H A P T E R
Manage Alarms
9
C H A P T E R
Change Card Settings
10
C H A P T E R
78-17194-01
NTP- D287 Modify and Delete Circuits
NTP- D288 Modify and Delete Overhead Circuits and Server Trails
NTP- D78 Create a Monitor Circuit
NTP- D329 Create a J0 Section Trace
NTP- D79 Create a J1 or J2 Path Trace
NTP- D332 Bridge and Roll Traffic
NTP- D309 Reconfigure Circuits
NTP- D310 Merge Circuits
NTP- D352 Manage VLANs
8-1
Before You Begin
8-1
NTP- D257 Change the PM Display
NTP- D195 Monitor Electrical Performance
NTP- D198 Monitor Ethernet Performance
NTP- D289 Create and Delete Ethernet RMON Thresholds
NTP- D254 Monitor STM-N Performance
NTP- D301 Monitor FC_MR-4 Performance
NTP- D302 Create or Delete FC_MR-4 RMON Thresholds
9-1
Before You Begin
9-1
NTP- D195 Document Existing Provisioning
NTP- D196 View Alarms, History, Events, and Conditions
NTP- D68 Delete Cleared Alarms from Display
NTP- D69 View Alarm-Affected Circuits
NTP- D70 View Alarm Counts on the LCD for a Node, Slot, or Port
NTP- D71 Create, Download, and Assign Alarm Severity Profiles
NTP- D168 Enable, Modify, or Disable Alarm Severity Filtering
NTP- D72 Suppress Alarms or Discontinue Alarm Suppression
NTP- D247 Provision External Alarms and Controls on the Alarm Interface Controller-International
10-1
Before You Begin
10-1
NTP- D88 Modify Line Settings and PM Parameter Thresholds for Electrical Cards
NTP- D89 Modify Line Settings and PM Parameter Thresholds for Optical Cards
7-4
7-5
7-6
7-8
7-9
7-10
7-11
7-11
8-2
8-3
8-4
8-5
8-6
9-2
9-3
9-4
Cisco ONS 15454 SDH Procedure Guide, R7.0
7-4
8-5
8-6
9-2
9-5
9-6
9-7
9-7
10-2
10-2
Contents
9-8
vii