Cisco ONS 15454 SDH Procedure Manual page 30

Procedures
NTP-D283 Create an Automatically Routed VCAT Circuit
NTP-D284 Create a Manually Routed VCAT Circuit
NTP-D325 Create an STM Test Circuit around the Ring
NTP-D350 Create a Server Trail
Manage Circuits
NTP-D199 Locate and View Circuits
NTP-D200 View Cross-Connect Card Resource Usage
NTP-D287 Modify and Delete Circuits
NTP-D288 Modify and Delete Overhead Circuits and Server Trails
NTP-D78 Create a Monitor Circuit
NTP-D329 Create a J0 Section Trace
NTP-D79 Create a J1 or J2 Path Trace
NTP-D332 Bridge and Roll Traffic
NTP-D309 Reconfigure Circuits
NTP-D310 Merge Circuits
NTP-D352 Manage VLANs
Monitor Performance
NTP-D257 Change the PM Display
NTP-D195 Monitor Electrical Performance
NTP-D198 Monitor Ethernet Performance
NTP-D289 Create and Delete Ethernet RMON Thresholds
NTP-D254 Monitor STM-N Performance
NTP-D301 Monitor FC_MR-4 Performance
NTP-D302 Create or Delete FC_MR-4 RMON Thresholds
Manage Alarms
NTP-D195 Document Existing Provisioning
NTP-D196 View Alarms, History, Events, and Conditions
NTP-D68 Delete Cleared Alarms from Display
NTP-D69 View Alarm-Affected Circuits
NTP-D70 View Alarm Counts on the LCD for a Node, Slot, or Port
NTP-D71 Create, Download, and Assign Alarm Severity Profiles
NTP-D168 Enable, Modify, or Disable Alarm Severity Filtering
NTP-D72 Suppress Alarms or Discontinue Alarm Suppression
NTP-D247 Provision External Alarms and Controls on the Alarm Interface Controller–International
Cisco ONS 15454 SDH Procedure Guide, R7.0
vi
6-106
7-1
7-2
7-4
7-5
7-6
7-8
7-9
7-10
7-11
7-11
8-1
8-2
8-3
8-4
8-5
8-6
9-1
9-2
9-4
6-97
6-101
6-103
7-2
7-4
8-5
8-6
9-2
9-3
9-5
9-6
9-7
9-7
9-8
78-17194-01