Dlp- D463 Refresh Fc_Mr-4 Pm Counts At A Different Time Interval - Cisco ONS 15454 SDH Procedure Manual

DLP- D463 Refresh FC_MR-4 PM Counts at a Different Time Interval

DLP-D463 Refresh FC_MR-4 PM Counts at a Different Time Interval
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the FC_MR-4 card where you want to view PM counts. The card view
Step 1
appears.
Step 2 Click the Performance tab.
Click the Utilization or the History tab.
Step 3
From the Interval drop-down list, choose one of four options:
Step 4
•
•
•
•
Click Refresh. The PM counts refresh with values based on the selected time interval.
Step 5
Return to your originating procedure (NTP).
Step 6
DLP-D465 Create FC_MR-4 RMON Alarm Thresholds
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, double-click the FC_MR-4 card where you want to create the RMON alarm thresholds.
In card view, click the Provisioning > RMON Thresholds tabs.
Step 2
Click Create. The Create Threshold dialog box appears.
Step 3
From the Slot drop-down list, choose the appropriate FC_MR-4 card.
Step 4
From the Port drop-down list, choose the applicable port on the FC_MR-4 card you selected.
Step 5
Cisco ONS 15454 SDH Procedure Guide, R7.0
21-40
1 min—This option displays the specified PM counts in one-minute time intervals.
15 min—This option displays the specified PM counts in 15-minute time intervals.
1 hour—This option displays the specified PM counts in one-hour time intervals.
1 day—This option displays the specified PM counts in one-day (24 hours) time intervals.
This procedure sets up RMON to allow network management systems
(NMSs) to monitor FC_MR-4 ports.
None
NTP-D24 Verify Card Installation, page 4-2
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning or higher
This task changes the window view to display specified PM counts in
time intervals depending on the interval option selected.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Retrieve or higher
Chapter 21 DLPs D400 to D499
78-17194-01