Provision Individual Card Bbe Or Ses Thresholds In Ctc - Cisco ONS 15454 DWDM Manual

Chapter 1 General Troubleshooting
Figure 1-11
Step 2 In the Defaults Selector field, click the transponder or muxponder card you wish to provision, then click
opticalthresholds > trunk > warning > 15min in the drop-down list.

Provision Individual Card BBE or SES Thresholds in CTC

Complete the following procedure to provision BBE or SES PM thresholds in CTC for an individual
TXP card.
In node view (single-shelf mode) or shelf view (multishelf mode), double-click the applicable transponder
Step 1
or muxponder card (TXP_MR_10G, TXPP_MR_2.5G, or MXP_2.5G_10G.)
Step 2 Click the Provisioning > OTN > G.709 Thresholds tabs
78-17742-02
Set Default BBE/SES Card Thresholds
1.3.5 Performance Monitoring Counters and Threshold Crossing Alerts
(Figure 1-12).
Cisco ONS 15454 DWDM Troubleshooting Guide, R7.0.1
1-27