Ntp- D328 View And Manage Osi Information - Cisco ONS 15454 SDH Procedure Manual

NTP- D328 View and Manage OSI Information

Opening a restore file from another node or from an earlier backup might affect traffic on the login node.
Caution
Click Restore.
Step 10
The Restore Database dialog box monitors the file transfer
Figure 15-3
Wait for the file to complete the transfer to the TCC2/TCC2P card.
Step 11
Step 12 Click OK when the "Lost connection to node, changing to Network View" dialog box appears. Wait for
the node to reconnect.
If you cleared a switch in
Step 13
Stop. You have completed this procedure.
NTP-D328 View and Manage OSI Information
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Additional information about the ONS 15454 SDH implementation of OSI is provided in the
Note
"Management Network Connectivity" chapter of the Cisco ONS 15454 SDH Reference Manual.
Complete the
Step 1
Step 2.
Perform any of the following tasks as needed:
Step 2
•
Cisco ONS 15454 SDH Procedure Guide, R7.0
15-8
Restoring the Database—In-Process Notification
Step
This procedure allows you to view and manage Open System
Interconnection (OSI), including the End System-to-Intermediate System
(ES-IS) and Intermediate System-to-Intermediate System (IS-IS) routing
information tables, Target Identifier Address Resolution Protocol (TARP)
data cache, and manual area table.
None
NTP-D108 Back Up the Database, page 15-5
NTP-D278 Set Up Computer for CTC, page 3-2
NTP-D326 Provision OSI, page 4-14
As needed
Onsite or remote
Provisioning or higher
"DLP-D60 Log into CTC" task on page
DLP-D183 View IS-IS Routing Information Base, page 18-70
3, reapply the switch as needed.
17-49. If you are already logged in, continue with
Chapter 15
(Figure 15-3).
Maintain the Node
78-17194-01