Cisco ONS 15454 SDH Procedure Manual page 93

Chapter 2 Install Cards and Fiber-Optic Cable
Table 2-2 Slot Compatibility for the XC-VXL-10G or XC-VXC-10G Card (continued)
Slot 1 2
Type MS MS
OC192SR1/
STM64IO Short
Reach and
OC192/STM64
2
Any Reach
FC_MR-4 X X
3
15454_MRC-12 X X
1. The term XC is used generically to mean cross-connect card.
2. Designated as STM64-XFP in CTC.
3. Designated as MRC-12 in CTC.
Continue with the following procedures, as needed:
Step 5
•
•
•
•
Stop. You have completed this procedure.
NTP-D16 Install STM-N Cards and Connectors
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
78-17194-01
3 4 5 6
MS MS MS MS
X X
X X X X
X X X X
NTP-D16 Install STM-N Cards and Connectors, page 2-7
NTP-D17 Install the Electrical Cards, page 2-10
NTP-D18 Install Ethernet Cards and Connectors, page 2-11
NTP-D286 Install the FC_MR-4 Cards, page 2-12
This procedure installs the optical cards (STM-1, STM1-8, STM-4,
STM4-4, STM-16, STM-64, and 15454_MRC-12). The MRC-12
(multirate), OC192SR1/STM64IO Short Reach (STM64-XFP Short
Reach), and OC192/STM64 Any Reach(STM64-XFP Any Reach) cards
require Small Form-factor Pluggables (SFPs/XFPs) to provide the fiber
interface to the cards. On all other optical cards, the fiber is plugged
directly into the card. Install according to site plan, if available.
STM-1, STM-4, STM-16, STM-64, and MRC-12 cards (as applicable)
NTP-D15 Install the Common Control Cards, page 2-2
As needed
Onsite
None
7 8 9 10
TCC2/
1 1
TCC2P XC AIC-I XC
Cisco ONS 15454 SDH Procedure Guide, R7.0
NTP- D16 Install STM-N Cards and Connectors
11 12 13 14
TCC2/
TCC2P MS MS MS
X X
X X X
X X X
15 16 17
MS MS MS
X X X
X X X
2-7