Logging Into Ctc - Cisco ONS 15454 SDH Procedure Manual

DLP- D60 Log into CTC
Note
If a Java Plug-in Security Warning dialog box appears, complete the
Security Certificate" task on page 21-1
Software Release 4.1 and later.
After you complete the security certificate dialog box (or if the certificate is already installed), a Java
Console window displays the CTC file download status. The web browser displays information about
your Java and system environments. If this is the first login, CTC caching messages appear while CTC
files are downloaded to your computer. The first time you connect to an ONS 15454 SDH, this process
can take several minutes. After the download, the CTC Login dialog box appears
Figure 17-10
In the Login dialog box, type a user name and password (both are case sensitive). For initial setup, type
Step 3
the user name CISCO15 and password otbu+1.
Cisco ONS 15454 SDH Procedure Guide, R7.0
17-50
If you are logging into ONS 15454 SDH nodes running different releases of CTC software, log
into the node running the most recent release. If you log into a node with an older release, you
will receive an INCOMPATIBLE-SW alarm for each node in the network running a new release,
and CTC will not be able to manage these nodes. To check the software version of a node, select
About CTC from the CTC Help menu. This will display the ONS 15454 SDH software version
for each node visible on the network view. If the node is not visible, the software version can be
read from the LCD display. To resolve an alarm, refer to the Cisco ONS 15454 SDH
Troubleshooting Guide.

Logging into CTC

to install the public-key security certificate required by
Chapter 17 DLPs D1 to D99
"DLP-D420 Install the Public-Key
(Figure 17-10).
78-17194-01