Dlp- D265 Change The Login Legal Disclaimer - Cisco ONS 15454 SDH Procedure Manual

Chapter 19 DLPs D200 to D299
When you display the detailed circuit window, path trace is indicated by an M (manual path trace) or an
A (automatic path trace) at the circuit source and destination ports.
Step 13 Return to your originating procedure (NTP).
DLP-D265 Change the Login Legal Disclaimer
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, click the Provisioning > Security > Legal Disclaimer > HTML tabs.
The existing statement is a default, non-customer-specific disclaimer. If you want to edit this statement
Step 2
with specifics for your company, you can change the text. Use the HTML commands in
format the text as needed.
Table 19-6
Command
<b>
</b>
<center>
</center>
<font=n, where n = point size>
</font>
<p>


<u>
</u>
Step 3 If you want to preview your changed statement and formatting, click the Preview subtab.
78-17194-01
This task modifies the legal disclaimer statement shown in the CTC login
window so that it will display customer-specific information when users
log into the network.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
HTML Commands for Formatting Legal Disclaimer
Description
Begins boldface font
Ends boldface font
Aligns type in the center of the window
Ends the center alignment
Changes the font to the new size
Ends the font size command
Creates a line break
Begins subscript
Ends subscript
Begins superscript
Ends superscript
Starts underline
Ends underline

DLP- D265 Change the Login Legal Disclaimer

Cisco ONS 15454 SDH Procedure Guide, R7.0
Table 19-6 to
19-71