Dlp- D146 Print Ctc Data - Cisco ONS 15454 SDH Procedure Manual

Hide thumbs Also See for ONS 15454 SDH:
Table of Contents

Advertisement

Chapter 18
DLPs D100 to D199
Return to your originating procedure (NTP).
Step 6
DLP-D146 Print CTC Data
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Click the tab (and subtab, if present) containing the information you want to print. For example, click
Step 1
the Alarms tab to print Alarms window data.
The print operation is available for all network, node, and card view windows.
From the File menu choose Print.
Step 2
In the Print dialog box, click a a printing option
Step 3
78-17194-01
This task prints CTC card, node, or network data in graphical or tabular
form on a Windows-provisioned printer.
Printer connected to the CTC computer by a direct or network
connection.
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Retrieve or higher
Entire Frame—Prints the entire CTC window including the graphical view of the card, node, or
network. This option is available for all windows.
Tabbed View—Prints the lower half of the CTC window containing tabs and data. The printout
includes the selected tab (on top) and the data shown in the tab window. For example, if you print
the History window Tabbed View, you print only history items appearing in the window. This option
is available for all windows.
Table Contents—Prints CTC data in table format without graphical representations of shelves,
cards, or tabs. This option does not apply to:
Provisioning > General > General and Power Monitor windows
Provisioning > Network > General window
Provisioning > Security > Policy, Access, and Legal Disclaimer windows
Provisioning > SNMP window
Provisioning > Timing > General and BITS Facilities windows
Provisioning > OSI > Main Setup window
Provisioning > OSI > TARP > Config window
Provisioning > Cross-Connect window
Provisioning > WDM-ANS > Node Setup window
Maintenance > Cross-Connect > Cards window
Maintenance > Database window
Maintenance > Diagnostic window
Maintenance > Protection window
(Figure
18-9).
Cisco ONS 15454 SDH Procedure Guide, R7.0

DLP- D146 Print CTC Data

18-37

Advertisement

Table of Contents
loading

Table of Contents