Dlp- D14 Create A Four-Fiber Ms-Spring Using The Ms-Spring Wizard - Cisco ONS 15454 SDH Procedure Manual

Chapter 17 DLPs D1 to D99
Figure 17-4
Assembly hinge pin
Assembly hinge
Step 4 Return to your originating procedure (NTP).
DLP-D14 Create a Four-Fiber MS-SPRing Using the MS-SPRing Wizard
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the View menu, choose Go to Network View.
Step 1
Click the Provisioning > MS-SPRing tabs.
Step 2
Click Create MS-SPRing.
Step 3
In the MS-SPRing Creation dialog box, set the MS-SPRing properties:
Step 4
•
78-17194-01
Removing the ONS 15454 SDH Front Door
Translucent
circles
for LED
viewing
Door hinge
This task creates a four-fiber MS-SPRing using the MS-SPRing wizard.
None
DLP-D60 Log into CTC, page 17-49
As needed; required to complete MS-SPRing setup
Onsite or remote
Provisioning or higher
Ring Type—Choose four-fiber.

DLP- D14 Create a Four-Fiber MS-SPRing Using the MS-SPRing Wizard

F A N
F A IL
C R
IT
M A
J
M IN
Cisco ONS 15454 SDH Procedure Guide, R7.0
17-11