Ntp-L41 Unpacking And Inspecting The Shelf; Dlp-L62 Unpacking And Verifying The Shelf - Cisco NCS 2006 Hardware Installation Manual

NTP-L41 Unpacking and Inspecting the Shelf

An improper removal (IMPROPRMVL) alarm is raised whenever a card pull (reseat) is performed, unless
Note
the card is deleted in CTC first. The alarm clears after the card replacement is complete.
NTP-L41 Unpacking and Inspecting the Shelf
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Complete the
Step 2 Complete the
Stop. You have completed this procedure.

DLP-L62 Unpacking and Verifying the Shelf

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco NCS 2000 Series Hardware Installation Guide
20
DLP-L62 Unpacking and Verifying the Shelf , on page
DLP-L63 Inspecting the Shelf, on page
Preparing to Install the Cisco NCS 2002, NCS 2006, and NCS 2015 Shelf
This procedure explains how to unpack the NCS 2002,
NCS 2006, and NCS 2015 shelves and verify their
contents.
None
None
Required
Onsite
None
20.
22.
This task removes the shelves from the package.
None
None
Required
Onsite
None