Dlp- D60 Log Into Ctc - Cisco ONS 15454 SDH Procedure Manual

Chapter 17 DLPs D1 to D99
DLP-D60 Log into CTC
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
For information about CTC views and navigation, see
Note
From the computer connected to the ONS 15454 SDH, start Netscape (PC or UNIX) or Internet Explorer
Step 1
(PC only):
•
Step 2 In the Netscape or Internet Explorer web address (URL) field, enter the ONS 15454 SDH IP address. For
initial setup, use the default address, 192.1.0.2. (This IP address appears on the LCD. You can suppress
the LCD IP address display using CTC. For more information, see the
task on page
78-17194-01
This task logs into CTC.
None
NTP-D278 Set Up Computer for CTC, page 3-2
One of the following procedures:
•
•
•
Required
Onsite or remote
Retrieve or higher
If you are using a PC, launch Netscape or Internet Explorer from the Windows Start menu or a
shortcut icon.
To install Netscape colors for Netscape use, type:
–
# netscape -install
To limit Netscape to 32 colors so that if the requested color is not available, Netscape chooses
–
the closest color option, type:
netscape -ncols 32
CTC requires a full 24-color palette to run properly. When using color-intensive applications
Note
such as Netscape in UNIX, it is possible that UNIX could run out of colors to use for CTC.
The -install and -ncols 32 command line options limit the number of colors that Netscape
uses.
19-72.) Press Enter.
NTP-D260 Set Up CTC Computer for Local Craft Connection to the
ONS 15454 SDH, page 3-3
NTP-D261 Set Up a Computer for a Corporate LAN Connection to the
ONS 15454 SDH, page 3-5
NTP-D262 Set Up a Remote Access Connection to the
ONS 15454 SDH, page 3-6
Appendix A, "CTC Information and Shortcuts."
Cisco ONS 15454 SDH Procedure Guide, R7.0

DLP- D60 Log into CTC

"DLP-D266 Change IP Settings"
17-49