Dlp- D54 Delete A Node From A Specified Login Node Group - Cisco ONS 15454 SDH Procedure Manual

Chapter 17 DLPs D1 to D99
DLP-D54 Delete a Node from a Specified Login Node Group
Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the CTC Edit menu, choose Preferences.
Step 2 In the Preferences dialog box, click the Login Node Groups tab.
Click the Login Node Group tab containing the node you want to remove.
Step 3
Click the node you want to remove, then click Remove.
Step 4
Click OK.
Step 5
Return to your originating procedure (NTP).
Step 6
DLP-D56 Disable Proxy Service Using Internet Explorer (Windows)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the Start menu, select Settings > Control Panel.
Note
Step 2 In the Control Panel window, choose Internet Options.
Step 3 In the Internet Properties dialog box, click Connections > LAN Settings.
Step 4 In the LAN Settings dialog box, complete one of the following tasks:
•
78-17194-01
This task removes a node from a specified login node group. To remove a
node from the current login node group, see
the Current Session or Login Group" task on page
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning or higher
This task disables proxy service for PCs running Internet Explorer.
None
NTP-D278 Set Up Computer for CTC, page 3-2
As needed
Onsite or remote
None
If you computer is running Windows XP, you can select Control Panel directly from the Start
menu. Make sure you are in Classic View before continuing with this procedure.
Uncheck Use a proxy server to disable the service.

DLP- D54 Delete a Node from a Specified Login Node Group

"DLP-D35 Delete a Node from
17-27.
Cisco ONS 15454 SDH Procedure Guide, R7.0
17-47