Cisco ONS 15454 SDH Procedure Manual page 261

Chapter 6 Create Circuits and Low-Order Tunnels
In the New VLAN dialog box, complete the following:
b.
•
•
•
c. Click OK.
Tip
In the Available VLANs column, click the VLAN you want to use and click the arrow button (>>) to
Step 18
move the VLAN to the Circuit VLANs column.
Click Next.
Step 19
The Circuit Creation (Circuit Routing Preferences) dialog box appears.
Verify the cross-connect information (in this step, "circuit" refers to the Ethernet cross-connect):
Step 20
• Circuit name
• Circuit type
• Circuit size
• VLANs
ONS 15454 SDH nodes
•
If the information is not correct, click the Back button and repeat the procedure with the correct
information. If the information is correct, check Route Automatically.
Click Finish.
Step 21
Complete the
Step 22
Complete the
Step 23
page 19-19.
From the View menu, choose Go to Home View.
Step 24
Click the Circuits tab.
Step 25
Highlight the circuit and click Edit.
Step 26
The Edit Circuit dialog box appears.
Click Drops and click Create.
Step 27
The Define New Drop dialog box appears.
From the Slot drop-down list, choose the STM-N card that links the ONS 15454 SDH to the
Step 28
non-ONS 15454 SDH equipment.
From the Port drop-down list, choose the appropriate port.
Step 29
From theVC4 drop-down list, choose the VC4 that matches the VC4 of the connecting
Step 30
non-ONS 15454 SDH equipment.
Click OK.
Step 31
Confirm the circuit information appears in the Edit Circuit dialog box and click Close.
Step 32
78-17194-01
VLAN Name—Assign an easily identifiable name to your VLAN.
VLAN ID—Assign a VLAN ID. The VLAN ID should be the next available number between 2
and 4093 that is not already assigned to an existing VLAN. Each ONS 15454 SDH network
supports a maximum of 509 user-provisionable VLANs.
Topology Host—Choose the topology host ID from the drop-down list.
You can also add VLANs in network view by choosing Tools > Manage VLANs. In the
All VLANs dialog box, click the Create button to open the Define New VLAN dialog box.
"DLP-D220 Provision E-Series Ethernet Ports" task on page
"DLP-D221 Provision E-Series Ethernet Ports for VLAN Membership" task on
NTP- D145 Create an E-Series Multicard EtherSwitch Manual Cross-Connect
Cisco ONS 15454 SDH Procedure Guide, R7.0
19-18.
6-87