Cisco ONS 15454 SDH Procedure Manual page 695

Chapter 20 DLPs D300 to D399
Figure 20-3
Screws
Step 2 Use the handles to pull the cover forward.
Step 3 Return to your originating procedure (NTP).
DLP-D322 Remove the FMEC Cover
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Unscrew the nut holding the ground wire to the shelf. Remove the nut and washer.
Step 1
Remove the ground wire from the left side of the shelf.
Step 2
Pull the right side of the hinge-locking spring
Step 3
78-17194-01
Unscrewing the FMEC Cover
C I S
C O
O p
O N
ti c a
S 1
l N
e tw 5 4 5
o r k 4
S y
s te
m
F A N
F A IL
C R
IT
M A
J
M IN
This task removes the FMEC cover.
Medium slot-head screwdriver
DLP-D321 Open the FMEC Cover, page 20-10
As needed
Onsite
None
DLP- D322 Remove the FMEC Cover
(Figure 20-4).
Cisco ONS 15454 SDH Procedure Guide, R7.0
20-11