Dlp- D193 Grant Superuser Privileges To A Provisioning User - Cisco ONS 15454 SDH Procedure Manual

Hide thumbs Also See for ONS 15454 SDH:
Table of Contents

Advertisement

Chapter 18
DLPs D100 to D199
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Step 4
Port # columns. For PM parameter definitions, refer to the "Performance Monitoring" chapter in the
Cisco ONS 15454 SDH Reference Manual.
Note
Return to your originating procedure (NTP).
Step 5
DLP-D193 Grant Superuser Privileges to a Provisioning User
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1
In node view, click the Provisioning > Defaults tabs.
Step 2
In the Defaults Selector area, choose NODE > security > grantPermission.
Click in the Default Value column for the default property you are changing and choose Provisioning
Step 3
from the drop-down list.
Note
Click Apply.
Step 4
A pencil icon appears next to the default name that will be changed as a result of editing the defaults file.
Note
Return to your originating procedure (NTP).
Step 5
78-17194-01
To refresh, reset, or clear PM counts, see the
on page
8-2.
This task enables Provisioning users to perform tasks such as retrieving
audit logs, restoring databases, and activating and reverting software loads.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
If you click Reset before you click Apply, all values will return to their original settings.
You must close your current CTC session and restart a new CTC session for the changes to take
effect.

DLP- D193 Grant Superuser Privileges to a Provisioning User

"NTP-D257 Change the PM Display" procedure
Cisco ONS 15454 SDH Procedure Guide, R7.0
18-81

Advertisement

Table of Contents
loading

Table of Contents