Dlp- D159 Delete A User On A Single Node - Cisco ONS 15454 SDH Procedure Manual

DLP- D159 Delete a User on a Single Node

Return to your originating procedure (NTP).
Step 6
DLP-D159 Delete a User on a Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note You cannot delete a user who is currently logged in. To log out a user, you can complete the
Log Out a User on a Single Node" task on page
option on the Delete User dialog box.
CTC will allow you to delete other Superusers only if at least one Superuser remains. For example, you
Note
can delete the CISCO15 user only if you have created another Superuser. Use this option with caution.
In node view, select the Provisioning > Security > Users tabs.
Step 1
Choose the user you want to delete.
Step 2
Click Delete.
Step 3
In the Delete User dialog box, verify that the user name displayed is the one you want to delete.
Step 4
Step 5 Click OK. Confirm that the changes appear; if not, repeat the task.
Step 6 Return to your originating procedure (NTP).
DLP-D160 Change User Password and Security Level on Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note You must add the same user name and password to each node the user will access.
Cisco ONS 15454 SDH Procedure Guide, R7.0
18-50
This task deletes an existing user from a single node.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
20-7, or you can choose the "Logout before delete"
This task modifies existing user settings for multiple nodes.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
Chapter 18 DLPs D100 to D199
"DLP-D315
78-17194-01