Cisco ONS 15454 SDH Procedure Manual page 785

Chapter 21 DLPs D400 to D499
If your operating system is Windows NT 4.0, verify that Service Pack 6a or later is installed. From
the Start menu, choose Programs > Administrative Tools > Windows NT Diagnostics and check
the service pack on the Version tab of the Windows NT Diagnostics dialog box. If Service Pack 6a
or later is not installed, do not continue. Install Service Pack 6a following the computer upgrade
procedures for your site.
Note
Insert the Cisco ONS 15454 SDH Release 7.0 software CD into your computer CD drive. The
Step 2
installation program begins running automatically. If it does not start, navigate to your computer's CD
directory and double-click setup.exe.
The Cisco Transport Controller Installation wizard displays the components that will be installed on
your computer:
• JRE 1.4.2
• Acrobat Reader 6.0.1
• Online User Manuals
CTC JAR files
•
Click Next.
Step 3
Complete one of the following:
Step 4
Click Typical to install both the Java Runtime Environment and the online user manuals.
•
Click Custom if you want to install either the JRE or the online user manuals.
•
Click Next.
Step 5
Complete the following, as applicable:
Step 6
If you selected Typical in
•
If you selected Custom, select the CTC component that you want to install and click Next.
•
–
–
Step 7 The directory where the installation wizard will install the CTC online user manuals appears. The default
is C:\Program Files\Cisco\CTC\Documentation.
If you want to change the CTC online user manuals directory, type the new directory path in the
•
Directory Name field, or click Browse to navigate to the directory.
If you do not want to change the directory, skip this step.
•
Click Next.
Step 8
Step 9 Review the components that will be installed. If you want to change your selections:
• If you selected Typical in
Choose Custom and repeat Steps
If you selected Custom in
•
until the component selection page appears. Repeat Steps
Click Next. It might take a few minutes for the JRE installation wizard to appear. If you selected Custom
Step 10
in Step 4
78-17194-01
Processor and RAM requirements are guidelines. CTC performance is faster if your computer
has a faster processor and more RAM.
Step
If you selected Online User Manuals, continue with
If you did not select Online User Manuals, continue with
Step
Step
and need to install a JRE, continue with
DLP- D433 Run the CTC Installation Wizard for Windows
4, skip this step and proceed to
Step
4, click Back twice to return to the installation setup type page.
5 through 8.
4, click Back once or twice (depending on the components selected)
Step 12.
Cisco ONS 15454 SDH Procedure Guide, R7.0
Step 7.
7.
Step 9.
6 through 8.
21-19