Dlp- D1 Unpack And Verify The Shelf Assembly - Cisco ONS 15454 SDH Procedure Manual

DLPs D1 to D99
DLP-D1 Unpack and Verify the Shelf Assembly
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
When you receive the ONS 15454 SDH system equipment at the installation site, open the top of the box.
Step 1
The Cisco Systems logo designates the top of the box.
Remove the foam inserts from the box. The box contains the ONS 15454 SDH shelf (wrapped in plastic)
Step 2
and a smaller box of items needed for installation.
To remove the shelf, grasp both rings of the shelf removal strap and slowly lift the shelf out of the box.
Step 3
Open the smaller box of installation materials, and verify that you have all items listed in the
Step 4
"Cisco-Supplied Equipment" section on page
Note
Return to your originating procedure (NTP).
Step 5
78-17194-01
This task removes the shelf assembly from the package.
None
Required
Onsite
None
The fan-tray assembly is shipped separately.
C H A P T E R
1-2.
Cisco ONS 15454 SDH Procedure Guide, R7.0
17
17-1