Dlp- D243 Create A Vlan - Cisco ONS 15454 SDH Procedure Manual

DLP- D243 Create a VLAN

DLP-D243 Create a VLAN
Purpose
Tools/Equipment
Prerequisite Procedures See
Required/As Needed
Onsite/Remote
Security Level
From the View menu, choose Go to Network View.
Step 1
From the Tools menu, choose Manage VLANS.
Step 2
In the All VLANs dialog box, click Create.
Step 3
In the Define New VLAN dialog box, complete the following:
Step 4
•
•
•
Click OK.
Step 5
Click Close.
Step 6
Return to your originating procedure (NTP).
Step 7
Cisco ONS 15454 SDH Procedure Guide, R7.0
19-46
This task creates a new VLAN.
None
creation procedures.
As needed
Onsite or remote
Provisioning or higher
VLAN Name—Assign an easily identifiable name to your VLAN.
VLAN ID—Assign a VLAN ID. The VLAN ID should be the next available number between 2 and
4093 that is not already assigned to an existing VLAN. Each ONS 15454 SDH network supports a
maximum of 509 user-provisionable VLANs.
Topology Host—Choose the node to serve as the topology host from the drop-down list. The
topology host is used to discover the VLAN topology. The login node is the default.
Chapter 6, "Create Circuits and Low-Order Tunnels"
Chapter 19 DLPs D200 to D299
for circuit
78-17194-01