Ntp- D314 Upgrade The Tcc2 Card To The Tcc2P Card - Cisco ONS 15454 SDH Procedure Manual

Hide thumbs Also See for ONS 15454 SDH:
Table of Contents

Advertisement

Chapter 12
Upgrade Cards and Spans
From the Cross Connect Cards drop-down list, choose Switch.
Step 5
When upgrading from XC-VXL-10G Card to the XC-VXC-10G card with Path Protection circuits and
Note
a cross connect side switch is performed, the path protected circuits may switch from a working to
protect path causing traffic hit.
Step 6
Click Yes on the Confirm Switch dialog box. Traffic switches to the XC-VXC-10G card that you inserted
in Step 3. The ACT/STBY LED on this card changes from amber to green.
Note
Note
Physically remove the now standby XC-VXL-10G card from the shelf and insert the second
Step 7
XC-VXC-10G card into the empty cross-connect slot:
a.
b.
c.
d.
e.
The upgrade is complete when the second XC-VXC-10G card boots up and becomes the standby
XC-VXC-10G card.
Note
Stop. You have completed this procedure.
NTP-D314 Upgrade the TCC2 Card to the TCC2P Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
78-17194-01
A switch generated on the XC-VXC-10G that is initiated from CTC is hitless.
The Interconnection Equipment Failure alarm appears, but it will clear when the upgrade
procedure is complete and the node has matching cross-connect cards installed.
Open the XC-VXL-10G card ejectors.
Slide the XC-VXL-10G card out of the slot.
Open the ejectors on the XC-VXC-10G card.
Slide the XC-VXC-10G card into the slot along the guide rails.
Close the ejectors.
After you change out the first card, CTC continues to display the XC-VXL-10G card in both
slots. The display does not change to reflect the XC-VXC-10G cards until the second card is
upgraded and the XC-VXC-10G card in that slot boots up.
This procedure upgrades the TCC2 card to the TCC2P card. The TCC2
and TCCP2 cards support ONS 15454 SDH Software R4.0 and later
software versions.
Two TCC2P cards
None
As needed
Onsite
Maintenance or higher

NTP- D314 Upgrade the TCC2 Card to the TCC2P Card

Cisco ONS 15454 SDH Procedure Guide, R7.0
12-5

Advertisement

Table of Contents
loading

Table of Contents