Dlp- D57 Disable Proxy Service Using Netscape (Windows And Unix) - Cisco ONS 15454 SDH Procedure Manual

DLP- D57 Disable Proxy Service Using Netscape (Windows and UNIX)

•
Return to your originating procedure (NTP).
Step 5
DLP-D57 Disable Proxy Service Using Netscape (Windows and UNIX)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Open Netscape.
Step 1
From the Edit menu, choose Preferences.
Step 2
In the Preferences dialog box under Category, choose Advanced > Proxies.
Step 3
Step 4 In the right side of the Preferences dialog box under Proxies, complete one of the following options:
•
•
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15454 SDH Procedure Guide, R7.0
17-48
Leave Use a proxy server selected and click Advanced. In the Proxy Setting dialog box under
Exceptions, enter the IP addresses of ONS 15454 SDH nodes that you will access. Separate each
address with a semicolon. You can insert an asterisk (*) for the host number to include all the
ONS 15454 SDH nodes on your network. Click OK to close each open dialog box.
For nodes that have the TCC2P secure mode option enabled, enter the MIC-C/T/P LAN port
Note
IP addresses.
This task disables proxy service for PCs and UNIX workstations running
Netscape.
None
NTP-D278 Set Up Computer for CTC, page 3-2
Required if your computer is connected to a network computer proxy server
and your browser is Netscape.
Onsite or remote
None
Choose Direct connection to the Internet to bypass the proxy server.
Choose Manual proxy configuration to add exceptions to the proxy server, then click View. In the
Manual Proxy Configuration dialog box under Exceptions, enter the IP addresses of the
ONS 15454 SDH nodes that you will access. Separate each address with a comma. Click OK to
close each open dialog box.
For nodes that have the TCC2P secure mode option enabled, enter the MIC-C/T/P LAN port
Note
IP addresses.
Chapter 17 DLPs D1 to D99
78-17194-01