Install And Connect The Router; Unpack The Router; Set Up Router On Desktop, Rack, Or Wall - Cisco 1000 Series Hardware Installation Manual

Install and Connect the Router

This chapter describes how to install and connect Cisco 1000 Series Integrated Services Router to LAN and
WAN networks.
Warning
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Installing the Cisco 1000 Series Integrated Services Router involve these tasks:
•
•
•
•
•
•

Unpack the Router

Unpack the router only when you are ready to install it. If the installation site is not ready, to prevent accidental
damage, keep the chassis in its shipping container until you are ready to install.
The router, accessory kit, publications, and any optional equipment you order may be shipped in more than
one container. When you unpack the containers, check the packing list to ensure that you have received all
the listed items.

Set up Router on Desktop, Rack, or Wall

After unpacking, based on your requirements, you can set up a Cisco 1000 Series Integrated Services Router
on a desktop, a rack, or the wall.
Unpack the Router, on page 31
Set up Router on Desktop, Rack, or Wall, on page 31
Connect Power Cable, on page 49
Connect the Router to a Console, on page 51
Connect WAN and LAN Interfaces, on page 55
Configure the Router at Startup, on page 56
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
3
C H A P T E R
31