Selecting Single Roll Attributes - Cisco ONS 15454 SDH Procedure Manual

Chapter 19 DLPs D200 to D299
Figure 19-5
Click Next.
Step 6
In the Pivot/Fixed Point 1 window, click the square in the graphic image that represents the facility that
Step 7
you want to keep
This facility is the fixed location in the cross-connect involved in the roll process. The identifier appears
in the text box below the graphic image. The facility that is not selected is the Roll From path. The
Roll From path is deleted after the roll is completed.
Figure 19-6
Click Next.
Step 8
In the Select New End Point area, choose the Slot, Port, and VC4 from the drop-down lists to select the
Step 9
Roll To facility
78-17194-01

Selecting Single Roll Attributes

(Figure 19-6).
Selecting a Path
HOP
HOP
VC4-*
VC4-*
(Figure 19-7).
DLP- D234 Roll the Source or Destination of One Optical Circuit
VC4-*
VC4-*
VC4-*
VC4-*
HOP
Cisco ONS 15454 SDH Procedure Guide, R7.0
VC4-*
19-31