Ntp- D205 Modify Users And Change Security - Cisco ONS 15454 SDH Procedure Manual

Chapter 11 Change Node Settings
NTP-D205 Modify Users and Change Security
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Complete the
Step 2
Perform any of the following tasks as needed:
Step 3
•
•
•
•
•
•
•
•
Complete the
Step 4
Stop. You have completed this procedure.
NTP-D87 Change SNMP Settings
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
Step 2.
Complete the
Step 2
78-17194-01
This procedure modifies user and security properties for the ONS 15454
SDH.
None
NTP-D30 Create Users and Assign Security, page 4-4
As needed
Onsite or remote
Provisioning or higher
"DLP-D60 Log into CTC" task on page
"NTP-D108 Back Up the Database" procedure on page
DLP-D271 Change Node Security Policy on a Single Node, page 19-74
DLP-D272 Change Node Security Policy on Multiple Nodes, page 19-76
DLP-D437 Change Node Access and PM Clearing Privilege, page 21-25
DLP-D193 Grant Superuser Privileges to a Provisioning User, page 18-81
DLP-D158 Change User Password and Security Level on a Single Node, page 18-49
DLP-D160 Change User Password and Security Level on Multiple Nodes, page 18-50
DLP-D159 Delete a User on a Single Node, page 18-50
DLP-D161 Delete a User on Multiple Nodes, page 18-51
"NTP-D108 Back Up the Database" procedure on page
This procedure modifies SNMP settings for the ONS 15454 SDH.
None
NTP-D34 Set Up SNMP, page 4-12
As needed
Onsite or remote
Superuser only
"DLP-D60 Log into CTC" task on page
"NTP-D108 Back Up the Database" procedure on page

NTP- D205 Modify Users and Change Security

17-49. If you are already logged in, continue with
15-5.
15-5.
17-49. If you are already logged in, continue with
15-5.
Cisco ONS 15454 SDH Procedure Guide, R7.0
11-7