Dlp- D147 Export Ctc Data - Cisco ONS 15454 SDH Procedure Manual

DLP- D147 Export CTC Data

Tip
Figure 18-9
Click OK.
Step 4
In the Windows Print dialog box, click a printer and click OK.
Step 5
Repeat this task for each window that you want to print.
Step 6
Step 7 Return to your originating procedure (NTP).
DLP-D147 Export CTC Data
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Click the tab containing the information you want to export (for example, the Alarms tab or the Circuits
tab).
Cisco ONS 15454 SDH Procedure Guide, R7.0
18-38
Maintenance > Timing > Source window
–
Maintenance > DWDM > ROADM Power Monitoring window
–
The Table Contents option prints all the data contained in a table and the table column headings. For
example, if you print the History window Table Contents view, you print all data included in the
table whether or not items appear in the window.
When you print using the Tabbed View option, it can be difficult to distinguish whether the
printout applies to the network, node, or card view. To determine the view, compare the tabs on
the printout. The network, node, and card views are identical except that the network view does
not contain an Inventory tab or a Performance tab.
Selecting CTC Data For Print
This task exports CTC table data as delineated text to view or edit the data
in text editor, word processing, spreadsheet, database management, or web
browser applications. You can also export data from the Edit Circuits
window.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Retrieve or higher
Chapter 18 DLPs D100 to D199
78-17194-01