Dlp- D462 View Fc_Mr-4 History Pm Parameters - Cisco ONS 15454 SDH Procedure Manual

Chapter 21 DLPs D400 to D499
DLP-D462 View FC_MR-4 History PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, double-click the FC_MR-4 card where you want to view PM counts. The card view
appears.
Step 2 Click the Performance > History tabs
Figure 21-13
Card View
Performance
History tab
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
Step 4 View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Prev-n columns. For PM parameter definitions, refer to the "Performance Monitoring" chapter in the
Cisco ONS 15454 SDH Reference Manual.
Return to your originating procedure (NTP).
Step 5
78-17194-01
This task enables you to view historical PM counts at selected time
intervals on an FC_MR-4 card and port to detect possible performance
problems.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Retrieve or higher
FC_MR-4 History in the Card View Performance Window
tab
Interval
drop-down
list

DLP- D462 View FC_MR-4 History PM Parameters

(Figure 21-13).
Port Refresh
drop-down button
list
Cisco ONS 15454 SDH Procedure Guide, R7.0
21-39