Cisco ONS 15454 SDH Procedure Manual page 466

DLP- D61 Create Login Node Groups
In the Members area, type the IP address (or node name) of a node you want to add to the group. Click
Step 4
Add. Repeat this step for each node that you want to add to the group.
Note
Click OK.
Step 5
The next time you log into an ONS 15454 SDH, the login node group will be available in the
Additional Nodes list of the Login dialog box. For example, in
created that contains the IP addresses for Nodes 1, 4, and 5. During login, if you select this group from
the Additional Nodes list and Disable Network Discovery is not selected, all nodes in the figure appear.
If Test Group and Disable Network Discovery are both selected, Nodes 1, 4, and 5 appear. You can
create as many login groups as you need. The groups are stored in the CTC preferences file and are not
visible to other users.
Figure 17-11
192.168.106.143
Node 2
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15454 SDH Procedure Guide, R7.0
17-52
If the ONS 15454 SDH node that you want to add to the login node group has TCC2P cards
installed and the TCC2P secure mode option is enabled, enter the MIC-C/T/P LAN port IP
address.
Login Node Group
Laptop PC
IP Address
192.168.106.100
Node 1
IP Address
192.168.105.119
Three node ring
Node 3
LAN/WAN (Ethernet)
Node 4
IP Address IP Address
192.168.104.109
Single
Chapter 17
Figure 17-11, a login node group is
Node 5
Two node ring
Node 6
IP Address
192.168.103.199
DLPs D1 to D99
78-17194-01