Dlp- D316 Log Out A User On Multiple Nodes - Cisco ONS 15454 SDH Procedure Manual

DLP- D316 Log Out a User on Multiple Nodes

In the Logout User dialog box, check Lockout before Logout if you want to lock the user out. This
Step 3
prevents the user from logging in after logout based on user lockout parameters provisioned in the Policy
tab. Either a manual unlock by a Superuser only is required, or the user is locked out for the amount of
time specified in the Lockout Duration field. See the
Single Node" task on page 19-74
Click OK.
Step 4
Click Yes to confirm the logout.
Step 5
Return to your originating procedure (NTP).
Step 6
DLP-D316 Log Out a User on Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the View menu, chose Go to Network View.
Click the Provisioning > Security > Active Logins tabs.
Step 2
Choose the user you want to log out.
Step 3
Click Logout.
Step 4
In the Logout User dialog box, check the nodes where you want to log out the user.
Step 5
In the Logout User dialog box, check Lockout before Logout if you want to lock the user out prior to
Step 6
logout. This prevents the user from logging in after logout based on user lockout parameters provisioned
in the Policy tab. Either a manual unlock by a Superuser only is required, or the user is locked out for
the amount of time specified in the Lockout Duration field. See the
Policy on Multiple Nodes" task on page 19-76
In the Select Applicable Nodes area, deselect any nodes where you do not want to change the user's
Step 7
settings (all network nodes are selected by default).
Click OK.
Step 8
In the User Change dialog box, click OK.
Step 9
Return to your originating procedure (NTP).
Step 10
Cisco ONS 15454 SDH Procedure Guide, R7.0
20-8
"DLP-D271 Change Node Security Policy on a
for more information.
This task logs out a user from multiple nodes.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
for more information.
Chapter 20 DLPs D300 to D399
"DLP-D272 Change Node Security
78-17194-01