Dlp- D9 Remove The Front Door - Cisco ONS 15454 SDH Procedure Manual

DLP- D9 Remove the Front Door

Press the door button to release the latch. A button on the right side of the shelf assembly releases the
Step 2
door.
Step 3 Swing the door open.
Return to your originating procedure (NTP).
Step 4
DLP-D9 Remove the Front Door
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Unscrew the nut holding the ground wire to the shelf. Remove the nut and washer.
Step 1
Remove the ground wire from the shelf.
Step 2
Hold the door at the top left corner and remove the door from its hinges
Step 3
Cisco ONS 15454 SDH Procedure Guide, R7.0
17-10
This task removes the front cabinet compartment door.
Open-end wrench
DLP-D8 Open the Front Cabinet Compartment (Door), page 17-9
As needed
Onsite
None
Chapter 17 DLPs D1 to D99
(Figure 17-4).
78-17194-01