Installing Fmecs On The Ons 15454 Sdh - Cisco ONS 15454 SDH Procedure Manual

Chapter 1 Install the Shelf and FMECs
Push the FMEC gently into the connector. The ONS 15454 SDH FMECs plug into electrical connectors
Step 4
on the back panel of the shelf assembly when the screws are tightened.
installation.
Figure 1-1
Mounting screws
Tighten the screws.
Step 5
Continue with the
Step 6
Stop. You have completed this procedure.
78-17194-01

Installing FMECs on the ONS 15454 SDH

Guide rail
F A N
F A IL
C R
IT
"NTP-D6 Install the Power and Ground" procedure on page
M A
J
M IN
Cisco ONS 15454 SDH Procedure Guide, R7.0
NTP- D220 Install the Power and Signal FMECs
Figure 1-1 shows FMEC
1-10.
1-9