Figure 21-4 Port Alarm Profile For An Oc3 Ir/Stm1 Sh 1310-8 Card - Cisco ONS 15454 SDH Procedure Manual

DLP- D426 Apply Alarm Profiles to Ports
Figure 21-4
Go to
To apply profiles on a port basis:
Step 3
In card view, click the port row in the Profile column.
a.
b. Choose the new profile from the drop-down list.
c. Click Apply.
Step 4 To apply profiles to all ports on a card:
In card view, click the Force all ports to profile drop-down arrow at the bottom of the window.
a.
Choose the new profile from the drop-down list.
b.
Click Force (still need to "Apply").
c.
Click Apply.
d.
In node view, the Port Level Profiles column indicates port-level profiles with a notation such as
"exist (1)"
To reapply a previous alarm profile after you have applied a new one, select the previous profile and click
Step 5
Apply again.
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15454 SDH Procedure Guide, R7.0
21-10
Port Alarm Profile for an OC3 IR/STM1 SH 1310-8 Card
Step 3 to apply profiles to a port. Go to
(Figure 18-6 on page
Step 4 to apply profiles to all ports on a card.
18-18).
Chapter 21 DLPs D400 to D499
78-17194-01