Dlp- D82 View Alarms - Cisco ONS 15454 SDH Procedure Manual

DLP- D82 View Alarms

•
•
Click OK.
Step 4
Return to your originating procedure (NTP).
Step 5
DLP-D82 View Alarms
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In card, node, or network view, click the Alarms tab to view the alarms for that card, node, or network
Step 1
(Figure
Figure 17-16
Table 17-3
Cisco ONS 15454 SDH Procedure Guide, R7.0
17-74
Destination Address—Type the IP address of the destination node (32 bit length) or destination
subnet (any other length).
Length—Choose the length of the destination subnet mask.
Use this to view current alarms on a card, node, or network.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning
17-16).
CTC Node View
lists the columns in the Alarms window and their descriptions.
Chapter 17 DLPs D1 to D99
78-17194-01