Ntp- D163 Restore The Node To Factory Configuration - Cisco ONS 15454 SDH Procedure Manual

Chapter 15 Maintain the Node
•
•
Stop. You have completed this procedure.
NTP-D163 Restore the Node to Factory Configuration
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Caution Cisco strongly recommends that you keep different node databases in separate folders. This is because
the reinitialization tool chooses the first product-specific software package in the specified directory if
you use the Search Path field instead of the Package and Database fields. You might accidentally copy
an incorrect database if multiple databases are kept in the specified directory.
Caution Restoring a node to the factory configuration deletes all cross-connects on the node.
Cisco recommends that you save the node database to safe location if you will not be restoring the node
Caution
using the database provided on the software CD.
78-17194-01
DLP-D184 View ES-IS Routing Information Base, page 18-71
DLP-D185 Manage the TARP Data Cache, page 18-72
This procedure reinitializes the ONS 15454 SDH using the CTC
reinitialization tool. Reinitialization uploads a new software package to
the TCC2/TCC2P cards, clears the node database, and restores the
factory default parameters.
ONS 15454 SDH System Software CD, Version 7.0.x
Java Runtime Environment (JRE) 1.4.2 or JRE 5.0 must be installed on
the computer to log into the node at the completion of the
reinitialization. The reinitialization tool can run on JRE 1.3.1_02,
JRE 1.4.2, or JRE 5.0.
NTP-D108 Back Up the Database, page 15-5
NTP-D278 Set Up Computer for CTC, page 3-2
And one of the following:
As needed
Onsite
Superuser
NTP-D260 Set Up CTC Computer for Local Craft Connection to the
•
ONS 15454 SDH, page 3-3
NTP-D261 Set Up a Computer for a Corporate LAN Connection to
•
the ONS 15454 SDH, page 3-5
Cisco ONS 15454 SDH Procedure Guide, R7.0

NTP- D163 Restore the Node to Factory Configuration

15-9